19-106 Vol. 3B
PERFORMANCE-MONITORING EVENTS
0CH
02H
UNC_GQ_SNOOP.GOTO_I
Counts the number of remote snoops that have
requested a cache line be set to the I state.
0CH
04H
UNC_GQ_SNOOP.GOTO_S_HIT_
E
Counts the number of remote snoops that have
requested a cache line be set to the S state from E
state.
Requires writing MSR
301H with mask = 2H.
0CH
04H
UNC_GQ_SNOOP.GOTO_S_HIT_
F
Counts the number of remote snoops that have
requested a cache line be set to the S state from F
(forward) state.
Requires writing MSR
301H with mask = 8H.
0CH
04H
UNC_GQ_SNOOP.GOTO_S_HIT_
M
Counts the number of remote snoops that have
requested a cache line be set to the S state from M
state.
Requires writing MSR
301H with mask = 1H.
0CH
04H
UNC_GQ_SNOOP.GOTO_S_HIT_
S
Counts the number of remote snoops that have
requested a cache line be set to the S state from S
state.
Requires writing MSR
301H with mask = 4H.
0CH
08H
UNC_GQ_SNOOP.GOTO_I_HIT_
E
Counts the number of remote snoops that have
requested a cache line be set to the I state from E
state.
Requires writing MSR
301H with mask = 2H.
0CH
08H
UNC_GQ_SNOOP.GOTO_I_HIT_
F
Counts the number of remote snoops that have
requested a cache line be set to the I state from F
(forward) state.
Requires writing MSR
301H with mask = 8H.
0CH
08H
UNC_GQ_SNOOP.GOTO_I_HIT_
M
Counts the number of remote snoops that have
requested a cache line be set to the I state from M
state.
Requires writing MSR
301H with mask = 1H.
0CH
08H
UNC_GQ_SNOOP.GOTO_I_HIT_
S
Counts the number of remote snoops that have
requested a cache line be set to the I state from S
state.
Requires writing MSR
301H with mask = 4H.
20H
01H
UNC_QHL_REQUESTS.IOH_RE
ADS
Counts number of Quickpath Home Logic read requests
from the IOH.
20H
02H
UNC_QHL_REQUESTS.IOH_WRI
TES
Counts number of Quickpath Home Logic write
requests from the IOH.
20H
04H
UNC_QHL_REQUESTS.REMOTE
_READS
Counts number of Quickpath Home Logic read requests
from a remote socket.
20H
08H
UNC_QHL_REQUESTS.REMOTE
_WRITES
Counts number of Quickpath Home Logic write
requests from a remote socket.
20H
10H
UNC_QHL_REQUESTS.LOCAL_
READS
Counts number of Quickpath Home Logic read requests
from the local socket.
20H
20H
UNC_QHL_REQUESTS.LOCAL_
WRITES
Counts number of Quickpath Home Logic write
requests from the local socket.
21H
01H
UNC_QHL_CYCLES_FULL.IOH
Counts uclk cycles all entries in the Quickpath Home
Logic IOH are full.
21H
02H
UNC_QHL_CYCLES_FULL.REMO
TE
Counts uclk cycles all entries in the Quickpath Home
Logic remote tracker are full.
21H
04H
UNC_QHL_CYCLES_FULL.LOCA
L
Counts uclk cycles all entries in the Quickpath Home
Logic local tracker are full.
22H
01H
UNC_QHL_CYCLES_NOT_EMPT
Y.IOH
Counts uclk cycles all entries in the Quickpath Home
Logic IOH is busy.
Table 19-20. Non-Architectural Performance Events In the Processor Uncore for
Processors Based on IntelĀ® Microarchitecture Code Name Westmere (Contd.)
Event
Num.
Umask
Value
Event Mask Mnemonic
Description
Comment