Vol. 3A 9-49
PROCESSOR MANAGEMENT AND INITIALIZATION
Table 9-19. Return Code Definitions
Return Code
Value
Description
SUCCESS
00H
The function completed successfully.
NOT_IMPLEMENTED
86H
The function is not implemented.
ERASE_FAILURE
90H
A failure because of the inability to erase the storage device.
WRITE_FAILURE
91H
A failure because of the inability to write the storage device.
READ_FAILURE
92H
A failure because of the inability to read the storage device.
STORAGE_FULL
93H
The BIOS non-volatile storage area is unable to accommodate the update
because all available update blocks are filled with updates that are needed
for processors in the system.
CPU_NOT_PRESENT
94H
The processor stepping does not currently exist in the system.
INVALID_HEADER
95H
The update header contains a header or loader version that is not
recognized by the BIOS.
INVALID_HEADER_CS
96H
The update does not checksum correctly.
SECURITY_FAILURE
97H
The update was rejected by the processor.
INVALID_REVISION
98H
The same or more recent revision of the update exists in the storage device.
UPDATE_NUM_INVALID
99H
The update number exceeds the maximum number of update blocks
implemented by the BIOS.
NOT_EMPTY
9AH
The specified update block is a subsequent block in use to store a valid
microcode update that spans multiple blocks.
The specified block is not a header block and is not empty.